| High sensitivity | Watercolors, works on paper, photographs, textiles, dyed materials, manuscripts, and many natural-history specimens | About 50 lux or less at the object | Light damage is cumulative and generally irreversible. Track total exposure in lux-hours, not just the momentary lux level. | Use low, even illumination; limit display duration; switch lights off when galleries are unoccupied; consider rotation and daylight exclusion. |
| Moderate sensitivity | Oil paintings, many painted surfaces, undyed wood, bone, and some composite objects | Often around 150 lux, subject to condition and material assessment | Paint, coatings, adhesives, and previous restoration can change an object’s sensitivity. Assess the complete object rather than its broad category alone. | Use controlled, well-aimed lighting and avoid unnecessary exposure. Set levels with a conservator’s assessment and monitor them at the object surface. |
| Low sensitivity | Stone, ceramics, glass, and many metals without light-sensitive coatings or attached materials | Up to about 300 lux may be suitable in some displays | The object may tolerate more light, but pigments, labels, coatings, and attached organic components may remain sensitive. | Use higher levels only where object condition and viewing needs justify them. Check for heat, glare, reflections, and damage to nearby sensitive objects. |
| Potentially light-sensitive or mixed-material objects | Composite objects, objects with unknown pigments or coatings, and items with uncertain treatment histories | Begin conservatively; a universal lux limit cannot be assigned without assessment | Uncertainty itself is a reason for caution. Visible light can cause fading even when ultraviolet radiation is minimized. | Seek conservation advice, use the lowest practical level, reduce display time, and review the object’s condition periodically. |
| Ultraviolet control | All collections, especially organic and dyed materials | Eliminate UV where practicable; a commonly cited upper limit is 75 µW/lm | UV is only one part of light risk. A low UV reading does not make prolonged visible-light exposure harmless. | Specify UV-filtering or low-UV sources and glazing where appropriate, then verify performance with measurement rather than relying on product descriptions. |
| Daily operating control | Galleries, cases, and temporary exhibitions | Measure illuminance in lux at the object’s position | For example, 50 lux for 2,000 display hours equals 100,000 lux-hours. Equivalent lux-hour totals can still have different effects depending on the material and exposure conditions. | Use timers, occupancy controls, dimming, shutters, or scheduled lighting where suitable. Record settings and exposure periods for review. |
| Guidance note: The figures above are commonly used planning guidelines, not universal safety guarantees. Final levels should be set by a qualified conservator based on the object’s materials, condition, display duration, and viewing requirements. Measure light at the object; do not use brightness alone as a measure of conservation risk. |