Index of Spec Sheets

JK Lighting Systems T5-T8 Linear Fluorescent


Download JK Lighting Systems T5-T8 Linear Fluorescent.pdf
Available with either spade or bull nose end caps
Fixture comes unpainted
Pick Your Color
Not a generic pre-paint


APPLICATION
  • Open office ambient lighting for virtually glare free and shadow free illumination.

FINISHES
  • Bare 20 gauge roll formed steel housing in solid or perforated patterns.

  • Customer to source local powder coating facilities for housing and die cast aluminum end caps

  • Reflectors:
  • Enhanced anodized aluminum.

FEATURES
  • Units are shipped with die cast aluminum joiners installed for suspension and structural continuity.

  • Designed to mount on exact 4 foot, 8 foot and 12 foot centers. Joiners will accept stems, single cable, and power cords as supplied by lighting fixture manufacturer.

  • A computer designed optical system that maximizes the output producing very wide distribution for even ceiling brightness with mounting from 12 to 18 inches from the ceiling. T5 and T5HO lamps efficiencies exceed 96% at 25 degree C ambient and over 100% at 35 degree C ambient. For T8 lamps the efficiencies exceed 80% at 25 degree C ambient. ceiling.

  • Architectural ends. There are two die cast aluminum designs available, “spade” and “bullnose” configurations. They are bolted to the die cast joiners for a complete architectural look.

  • The ballast bracket is shipped as an assembly with lamp holder brackets and adjustable ballast bracket attached.

  • Reflectors are slotted when used with the perforated housing.

OPTIONAL FEATURES
  • The housings are roll formed which allows custom lengths with predictable results. For wall- mounted version. Please contact us for any optional features. Custom modifications in the physical specification and color are available for this fixture.

 
Select an appropriate choice from each column
JKDI-880-254T5HO-48-SP-120
Prefix Fixture Type T5 Lamp Type T8 Lamp Type End Caps Voltage
JK
DI = Direct - Indirect
       880 Series
228-T5-48 = 2 F28 -28w T5 Lamps 48"
328-T5-48 = 3 F54T5HO -28w T5 Lamps 48"
254-T5HO-48 = 2 F54T5HO -54w T5 Lamps 48"
354-T5HO-48 = 3 F28T5 -54w T5 Lamps 48"
428-T5-96 = 4 F28T5 -28w T5 Lamps 96"
628-T5-96 = 6 F28 -28w T5 Lamps 96"
454-T5HO-96 = 4 F54T5HO -54w T5 Lamps 96"
654-T5HO-96 = 6 F54T5HO -54w T5 Lamps 96"
232-T8-48 = 2-32W T8 Lamps 48"
432-T8-96 =4 -32W T8 Lamps 96"
632-T8-12 = 6-32W T8 Lamps 12'
 Available as special order 
SP = SPADE
BN = BULL NOSE
120v
277v
MT